Hiyah fellow KnK-ers!
Today I’d like to share a matching Valentine set with you. Each element has the same heart design which is delicate enough for a female recipient but not too frilly for the men in our lives. There is a card, a pillow box for your sweet treats and a tag for any larger gifts. The cut files are available at the end of this post 🙂
These are the Materials I used:
These are the Zing Settings I used:
- Blade = Standard
- Blade Height = 25 post-it notes
- Offset = 0.30
- Speed = 10
- Force = 90
- Passes = 1
Assembly: All 3 items are very simple to assemble, simply cut the larger pieces from white card and the detail pieces in red or pink, attach these to your larger pieces with some wet glue to give you some wiggle time for perfect alignment.
You can add an insert to your card if you wish to prevent your message from showing through the front of your card.
If your sweets are small and run the risk of falling through the holes in the front of your pillow box, try adding a piece of acetate or vellum behind the heart detail.
Here are today’s Cut Files: