Engraving on Wood With my KNK Force and the Rotary Tool

Wood Carving Decor

I have been playing with my KNK Force as well as Rotary Tool. I have never carved on wood before. This was my first time and I can tell you, personally,  that it was much easier than what I thought it would be. At the start i was quite intimidated by this project, but through out this project I’ve gained the confidence to face any project of this media! So don’t be intimidated; give it a try :)! This is not perfect but I am more than happy with the results, because I know that I can practice more to get results that i am satisfied with, lol. I wanted to try engraving my cousins name, Daisy, in wood. For this I used the Rotary Tool in my Force. I bought the wood I used in Walmart for $1.00, and the stand in Dollar Tree for a $1.00 as well!

If you want more inspiration to do your own projects, follow KNK Force on Facebook! If you think that it is better for you to read or ask question in Spanish, then follow us in Facebook Cortadoras KNK Español. between these two Facebook pages you can find many projects as well as help using the KNK Force. Click Here, Here,  Here, AND Here to see some of the carved projects, using the Rotary Tool by KNK Force owners.

Wood Engraved

 

The materials that I used for this project were:

Settings for KNK Force:

The settings used for the Red Blade:

  • Passes = 1
  • CD = 187
  • CS =  10
  • US = 10
  • PS = 10
  • LS = Default – 20

Steps:

Please, READ all the safety instructions before you commence working with the Rotary Tool.

  1. I measured the wood with a caliper to see what recommendation the Rotary Tool Online Calculator would give me. But because I would not be cutting the wood completely, I just used the recommendations as a guideline.
  2. I taped the wood to the mat and placed it in my machine.
  3. Then, with the Rotary Tool unplugged I added it to my machine
  4. I Followed these instructions: 7.07.2 Inserting the Rotary Tool into the Adaptor
  5. After that, I plugged in the Rotary tool and put it to work.
  6. In C3, I already had my project ready to start carving, so I put it to work as well.

Here there is a short video of my Machine doing part of it works.

HAPPY 4th of July!!!

2 thoughts on “Engraving on Wood With my KNK Force and the Rotary Tool

  1. It turned out great Omayra. And the $1 plaques from Wal-Mart and Michaels are a great way to inexpensively practice.

Comments are closed.