It is almost Valentine’s Day. When I needed to come up with a project for one of the classes I teach at the sewing/quilt store where I work, I decided to combine my hobbies again and make Valentine cards that used both the cutter and the embroidery machine.
This is the end result.
Cardstock – red, pink, and white
Soft-n-Stable (a foam batting)
Tear Away Stabilizer
Rotary Cutter with Pinking Blade
KNK Force Blade: Red Cap
Cardstock:Blade Tension – 2, Passes – 1, Cutting Depth – 60-65 depending on thickness of cardstock, Blade Offset – red cap blade, Overcut – .38
Scrapbook Paper: Blade Tension – 1.5, Passes – 1, Cutting Depth – 35, Blade Offset – red cap blade, Overcut – .38
Husqvarna/Viking EPIC Embroidery Machine
Kits were prepared that contained three cardstock blanks. Two of the blanks had heart openings cut into the front of the card. The third card had a square of felt to be embroidered and sewn to the front. An extra piece of card stock was included in the kit to be glued over the inside of the front of the card to hide the stitching. Each kit contained an envelope that was cut from Valentine themed scrapbook paper. The envelopes were folded with the printed side to the inside and the plain white side to the outside.
The embroidered felt square was embroidered, trimmed with the rotary cutter with the pinking blade and then stitched to the front of the card with a long straight stitch. The two cards with the hearts were embroidered and as the last step of the embroidery, the prepared card blank was positioned over the embroidery and stitched to the fabric in the embroidery hoop.
Card blanks and felt squares were available in red, pink, and white.