Beautiful Suitcase Box (Envelope) for a Birthday Invitation (FREE FILES)

Beautiful Suitcase Box (Envelope) Birthday Invitation, Omayra, KNK,

This Beautiful Suitcase Box (Envelope) for a Birthday Invitation is a very unique and different way of making your traditional  Invitation. This suitcase Box will be the envelope for a mini passport styled invitation.

This Suitcase Box is really easy to make. You can make one out of one 12×12 cardstock.

Below you can see the Passport invitations that will be inside the Suitcase Box. Those Passport Invitations made using cardstock and foil.

Beautiful Suitcase Box (Envelope) Birthday Invitation, Omayra, KNK

Materials to make Beautiful Suitcase Box (Envelope) for a Birthday Invitation :

Settings KNK Force:

  • Blade = Red
  • BT = 1
  • P= 1
  • CD = 80
  • US = 25
  • CS= 25
  • PS = 40
  • LS = 40

Instructions:

  1. I made the file to fix one box in one 12×12 cardstock.
  2. After the KNK Force cut the file, I glued them to form the suitcase.
  3. Then, I cut another piece of cardstock to form the hanger of the suitcase.
  4. Finally, I added a triangle on every corner of the suitcase, so it looks exactly like a real suitcase but in a tiny way, lol.

FREE FILES (ARCHIVOS GRATIS)

 

ESPAÑOL

Beautiful Suitcase Box (Envelope) Birthday Invitation, Omayra, KNK,

Esta Hermosa Maleta (Sobre) para una Invitación para Cumpleaño es una forma única y diferente de hacer una invitación. Esta pequeña maleta, será el sobre para una invitación mini pasaporte.

Este proyecto es realmente facil de hacer. Puedes hacer una maleta en una cartulina de 12×12

Abajo pueden ver las invitaciones de Pasaporte que estarán dentro de las cajas en forma de maleta. Estas Invitaciones fueron hechas con cartulina y foil.

Beautiful Suitcase Box (Envelope) Birthday Invitation, Omayra, KNK

Materiales para hacer la Hermosa Caja Maleta (Sobre) Invitación para cumpleaño:

Ajustes KNK Force:

  • Blade = Red
  • BT = 1
  • P= 1
  • CD = 80
  • US = 25
  • CS= 25
  • PS = 40
  • LS = 40

Instrucciones:

  1. Hice el archivo que pudiera hacer una maleta en una cartulina 12×12.
  2. Luego que la KNK Force cortara el archivo, lo pegué para formar la maleta.
  3. Luego, corté otro pedazo de cartulina para formar la agarradera de la maleta.
  4. Finalmente, añadí algunos triangulos en cada esquina de la maleta para que esta luciera exactamente como una maleta real pero en miniatura, jajaja

 

FREE FILES (ARCHIVOS GRATIS)

 

Personalized Rhinestone Gift Idea Using KNK Cutter Machine

Personalized Rhinestone Gift Idea Using KNK Cutter Machine, Omayra Duarte Personalized Rhinestone Gift Idea Using KNK Cutter Machine, Omayra Duarte

There is always a good reason to make any gift. Especially a Personalized Rhinestone Gift Idea Using KNK Cutter Machines. There was not a special occasion. I made This gift for my AWESOME and BEAUTIFUL Mother because she deserved it! This is a gift that you can make for Christmas, birthdays, Valentine’s day, teacher appreciation, etc.

I wanted to do something a little bit different with this project. So, I used Rhinestones and instead of applying them on a Shirt, I applied them to a glass vase. The results were Adorable!

Materials:

Settings KNK Force:

  • Blade = Blue
  • BT = 1.5
  • P= 2
  • SD = 75
  • ED = 100
  • CS= 15

Instructions:

  1. Because I already had a vase with a heart shape, The First thing to do was to measure the vase, in order to draw a heart in SCAL 5 utilizing the measures that I took.
  2. Once I had the heart already drawn in SCAL, I then selected the letter that I would be using.
  3. I decided to use the Rhinestones SS 10 for the heart shape. Using Effect>Rhinestone, I chose the SS 13 so the holes would be a little bit bigger than my Rhinestones.
  4. For the letter, I decided to use a smaller Rhinestones (SS 6), So using Effect>Rhinestone and I chose SS 10.
  5. When everything was done in the software, I sent it to KNK Force to be cut on the Motif Rubber.
  6. Then, I poured the respective Rhinestones on each design and applied the Transfer tape on top of them, to then be able to transfer them to the glass.
  7. Using alcohol, I cleaned the glass where the Rhinestones would be applied.
  8. With the Iron on high, I applied the Rhinestones on the glass.

ESPAÑOL

Personalized Rhinestone Gift Idea Using KNK Cutter Machine, Omayra Duarte

Siempre hay una buena razón para hacer un regalo, especialmente un regalo Personalizado con Rhinestones utilizando las Máquinas KNK. No había una celebración especial pero hice este regalo para mi INCREIBLE Y HERMOSA Madre, sólo porque ella se lo merece! Este es un regalo que puedes hacer para Navidad, cumpleaños, dia de San Valentín, para los maestros, etc.

Para este proyecto quise hacer algo un poco diferente, por lo que utilicé imitaciones de diamantes y en lugar de aplicarlas en una camisa, las apliqué a un jarrón de vidrio. ¡El resultado fue Adorable!

Materiales:

Settings KNK Force:

  • Cuchilla = Azul
  • BT = 1.5
  • P= 2
  • SD = 75
  • ED = 100
  • CS= 15

Instrucciones:

  1. Como ya tenía un florero en forma de corazón, lo primero que hice fue medir el florero para diseñar un corazón en SCAL 5 con las medidas tomadas.
  2. Una vez el corazón fue diseñado en SCAL, entonces seleccioné la letra que estaría utilizando.
  3. Para la figura de corazón decidí utilizar unos diamantes de imitacion SS10. Utilizando Efectos>Estrás escogí SS13 para que los agujeros me quedaran un poco más grande que los diamantes de imitacion que iba a utilizar.
  4. Para la letra, yo decidí utilizar un diamante de imitación mas pequeña (SS 6). Asi que utilizando Efectos>Estrás, seleccioné SS 10.
  5. Cuando todo estaba listo en el programa, envié esto a mi cortadora KNK Force para ser cortado en Motif Rubber.
  6. Luego, derramé los respectivos diamantes de imitaciones sobre cada diseño y puse la cinta de transferencia encima de estos para ser transferidos al vidrio.
  7. Utilizando alcohol, limpié el vidrio donde ubicaría los diamantes de imitación.
  8. Con la plancha en alta temperatura, transferí los diamantes de imitaciós al vidrio.

Rotary Tool Wood Engraved and Painted (Spanish)

Rotary Tool Wood Engraved and Painted, Omayra Duarte

We have a new member in our family, it’s a girl! Now, I wanted to bring her a present but I also wanted to bring to my granddaughter (oldest of the two) a present as well. I was wondering what gift would make her feel as special as she is. I didn’t want her to feel excluded, lol. So I decided to make her a Rotary Tool Wood Engraved and Painted illustration with her name on it. Using my KNK Force and the Rotary tool, I was able to make her truly happy. When she read her name on that piece of wood, She was so excited, you could see the joy in her face. I felt that I had gone above and beyond my goals.

This is how the wood looks when the engraving is finished. I LOVE it!!!! I decided to paint the wood but you can just apply a layer of varnish, leaving the wood in it’s natural state.

Rotary Tool Wood Engraved and Painted, Omayra Duarte

This is another project that assures me I have the BEST machines.

Rotary Tool Wood Engraved and Painted Materials:

Settings:

  • Blade Offset = 0
  • Passes (Multi-Cut) = 3
  • SD = 30
  • ED = 95
  • US = 25
  • CS = 15
  • PS = 15
  • LS = 40

Instructions:

  1. First, I choose the design that I wanted to use and then I wrote my Granddaughter’s name.
  2. Then, I marked the center of the wood that I was using, Due that I used the Center Point as a Cut Mode.
  3. After that, I taped the wood to my mat to secure it.
  4. Once the mat was in place, I then established the Origin exactly on the middle of my wood.
  5. When everything was set, I turned on the Rotary tool and then clicked on the cut icon to make the Engraving.

The results were very nice and clean. I LOVE it!

ESPAÑOL – ESPAÑOL – ESPAÑOL – ESPAÑOL – ESPAÑOL


Rotary Tool Wood Engraved and Painted, Omayra Duarte

Tenemos un nuevo miembro en nuestra familia. Así que quise traerle un regalo pero me estuve preguntando que regalo llevarle a mi nieta para hacerla sentir especial también. Por lo que decidí hacerle una Madera Grabada y pintada con su nombre utilizanto la Herramienta Rotatoria. Así que utilizando mi KNK Force y la Herramienta Rotatoria pude hacerla muy feliz. Cuando ella leyó su nombre en la pieza de madera, ella se puso tan contenta que me hizo sentir que había alcanzado mi meta, Hacerla sentir Especial!

Así es como se ve la madera una vez grabada. Me ENCANTA!!! Yo decidí pintar la madera pero ustedes solo pueden aplicar una capa de Varnish y dejar la madera natural.

Rotary Tool Wood Engraved and Painted, Omayra Duarte

Este es otro proyecto que me asegura tener Las MEJORES máquinas.

Materiales:

Ajuestes:

  • Blade Offset = 0
  • Passes (Multi Cut) = 3
  • SD = 30
  • ED = 95
  • US = 25
  • CS = 15
  • PS = 15
  • LS = 40

Instrucciones:

  1. Primero, decidí el diseño a utilizar y luego escribí el nombre de mi nieta.
  2. Luego, marqué el centro de la pieza de madera que estaba utilizando, ya que estaba utilizando “Center Point” como Modo de Corte (Cut Mode).
  3. Luego de eso, Con cinta adhesiva aseguré la madera al tapete de corte.
  4. Una vez el tapete estaba en su lugar, establecí el Origen exactamente en el medio de mi madera.
  5. Cuando todo estaba listo, prendí la Herramienta Rotatoria y luego hice clic en cortar para hacer el grabado.

El resultado fue limpio y nítido, Me Encanta!

Styrofoam Name Decoration’s Baby Shower, Beautiful Decoration

Styrofoam Name Decoration's Baby Shower

My Nephew is having a Baby, so, we made Styrofoam Name Decoration’s Baby Shower to decorate their table. This name is a 3D project that is very easy to make.

The materials that we are going to use for the Styrofoam Name Decoration’s Baby Shower project are:

Settings for Groove-e Machine:

  • Force = 10
  • Speed = 150

Steps to make the Decorative Arc:

  1. I designed the name of the baby using MTC
  2. Then, I cut the name using Vynil and with the transfer tape, I pasted the name Styrofoam Name Decoration's Baby Shower on a styrofoam block. Because my styrofoam was not thick, I glued two styrofoam together to make it thicker. Styrofoam Name Decoration's Baby Shower
  3. After that, I cut the styrofoam using a Hot knife foam cutter
  4. Once all the letters were cut, I removed the vinyl and painted everything white.
  5. With the paint still wet, I just poured glitter on it.
  6. Finally, I embellished it using some paper flowers and a sign that I had done in the past.

Beautiful Baby Shower Doll Decoration, Excellent Party Favor

This is a Beautiful Baby Shower Doll Decoration, Excellent Party Favor made with Foamy and the Wonderful KNK Cutting machines. KNK Cutters, can cut Foamy with ease. What I really love about using my KNK with foamy is that once you have the file, you do not need to re-measure or mark your foamy again to cut it. Just open the file, send the file to cut and you will have the exact same result as before. You can also  cut more than one piece at a time, which makes you work faster, saving you not only time but material.

Materials:

  • KNK Digital Cutting Machine (I used the KNK Force for this project)
  • Blue cap blade (I just noticed that the Blue Cap Blade cut the 3mm foamy perfectly and clean)
  • MTC
  • Foamy
  • Foam Ball (I used the Christmas Foam ball ornament)
  • Iron
  • Glue gun
  • Piece of fabric
  • Acrylic Paint
  • Embellishes
  • Paintbrush

KNK Force Settings:

  • Blade = Blue
  • BT = 1
  • P= 1
  • CD = 70
  • CS= 20
  • UP = 20
  • PS = 40
  • LP = 40
  • BO = Blue blade

KNK Groove-e Settings

  • Blade = Blue
  • F = 25 – 35
  • V = 150

Instructions:

  1. First, I searched the internet for a picture of a short pant and I traced it in MTC,  using the Draw Bézier.
  2. Then, I measured the Foam balls to know the size of the pieces that would be forming the face, the hair and the body. Including the legs.
  3. Then, I searched MTC for some arms.

Head:

  1. To form their heads, I preheat my iron and put it to the Foamy that would be forming the hair. When the foamy is manageable, I try to cover 1/2 of the foam ball. And I did the same with the other half of the Foam ball, with the foamy, that would be forming the face.
  2. After having both pieces covering the head, I trimmed the excess.
  3. Now, I heated the hair to make it curly or just heat half of them to make it straight. If you want the hair to look straight, do not heat too much and with the palm of your hand, you will form the ponytail. After the hair has the shape that you want it, glue it to the head. At this point, you can draw her face.

Belly:

  1. To form the belly, I cut the medium Foamball NOT in half but a little bit more than a half. I could say one finger more than half.
  2. I then placed the baby foot that I cut and I glued five beads to make the toes. Then, I did the exact same process that I did with the head. Preheat the piece of Foamy that will be covering the belly and I covered the foam ball

Chest and Shoes: (The chest and shoes have the same process)

  1. Take a small foam ball and cut it in half. For shoes, cut each half foam ball in less than half again. For the chest, cut almost in half again or the size that you want.
  2. Then glue the Shoes to a piece of foamy to make the underneath of the shoes and trim it.
  3. Finally, put a border to the shoes and a piece to make the belt
  4. Then, glue the shoes to the legs, which were done just rolling the foamy to a wood stick.

Short Pant:

  1. You need two pieces of the short pant. The first thing that you are going to do is to fold a little bit the end of the legs to make a the seam in the pants.
  2. Then, you are going to put the outside of the pant inside to glue it like shown in picture #1. Picture #2 is showing that you are going to glue just the right and left border of the pant. Picture #3 shows that you have to pull the inside of the pant out in order to glue between the legs to finish forming the pant.

Arms:

  1. I heated the arms so they take that curve. Then, I glued a piece of fabric to make the sleeve and put them aside.

Body:

  1. Now is time to make her body. Take a foam ball exactly the same size that you did for her belly and cut it in half. Cover that half foam ball with the foamy cut for her body. You do not have to heat this foamy, Just glue it to the half foam ball.
  2. Now that you have the body, it is time to put everything together.
    1. Start gluing the belly to the body.
    2. Now glue the chest without the blouse and then put the blouse covering the upper part of the body.
    3. And then glue the short pant.
    4. Then glue a piece of fabric around the blouse.
    5. Glue the Head, the arms and the legs.
    6. Embellish as desired.

FREE FILES:

SVG

SCAL