In reverse

So many of the “hand painted signs” that you see are actually made with a vinyl stencil.

Materials

wood

wood stain

vinyl

spray paint

clear transfer tape

Settings

15″ KNK Maxx

red capped blade

Force 38

Speed 500

For this project I used a 12×12 piece of wood which I had stained black. I then designed my saying and centered it in a 12×12 square and cut it out. I weeded the letters out of the square and used clear transfer tape to transfer the 12×12 square of vinyl to the 12×12 square wood plaque. I then used a hard squeegee and  made sure the vinyl was adhered to the wood plaque. After removing the transfer tape I went over the vinyl again with the squeegee. I then debated whether to use a brush to apply the paint or use spray paint and decided to use spray paint. I sprayed several “misting coats” until all of the lettering was white. Spray paint dries very quick so I was able to remove the vinyl after a few minutes