Engraving License Plate Blanks with Fill

I just can’t get enough of KNK ENGRAVING! These acrylic license plates are a lovely medium to work with – very easy to engrave and very striking when done.

Some license plates are a solid glossy color, while others are a mirror or reflective glossy color. The black in these photos are solid while the red are mirror-like.   Engraving License Plates

Materials:

Settings (Maxx Air):

  • f = 60
  • v = 150
  • p = 3

Instructions:

  1. Use a very sticky mat. Place the license plate blank on the mat between pinch wheels. Use painter’s tape to ensure it will not move during the engraving. I used the grid on the mat to place my plate and to set the origin. This made it easy to turn off the machine and work on the plates at different times (unlike when you create a template to place an engraving object into).
  2. Adjust the settings for engraving. Be sure to uncheck offset.
  3. Engrave your design(s).
  4. Remove all of the shavings and clean the license plate. I used a non-ammonia glass cleaner.

Engraving on Black License Plate

The solid fill engraving shows up clearly. The first plate I engraved had only an outline and I can’t even get a clear picture of it. The solid fill makes a profound difference.