Thank you so much

Hello fellow KnK-ers!

Today I’d like to share a Thank You card that I made with very minimal supplies, having a Zing means that I can create cards such as this one below using just card, paper and adhesive. If you would like to re-create it, the cut file is available at the end of the post.

Thank You Swirly Set

These are the Materials I used:

These are the Zing Settings I used:

  • Blade = Standard
  • Blade Height = 25 post-it notes
  • Offset = 0.30
  • Speed = 10
  • Force =  80 paper/100 card
  • Passes = 1

Assembly: Using a square card from my stash, I added 2 layers of patterned paper to the front. I cut the larger pieces inside the cut file from some grey card and the smaller pieces from some white card and glued them together. I adhered the corner pieces directly to my card front then added some small pieces of 3d foam pads behind the middle element to give it some dimension and make it really stand out.

If you would like to see more projects I have created with my Zing, access my Free Cut Files and read my Terms of Use, you can find my blog here: www.birdscards.com

Here is today’s Cut File:

Thank You Swirly Set by Bird

Thank You Swirly Set Cut File by Bird

Happy Birthday Edge Card x 3

Hello fellow KnK-ers!

I have a Birthday Card for you today, the Happy Birthday sentiment protrudes diagonally from the card base layers. The design is a simple one but it can easily be decorated to suit different recipients. I have decorated the card in 3 different ways today, one card is more masculine, one card is more feminine and the card I show in the assembly photos is more suitable for a young girl. The cut file is available at the end of the post 🙂

HappyBirthdayEdgeCard8

These are the Materials I used:

  • My KnK Zing
  • Make the Cut Software
  • Cardstock
  • Patterned Paper
  • 3D Foam Pads
  • Glitter Card, Twine & Gems to embellish

These are the Zing Settings I used:

  • Blade = Standard
  • Blade Height = 25 post-it notes
  • Offset = 0.30
  • Speed = 10
  • Force =  80 paper/100 card
  • Passes = 1

Pic 1. Below are the pieces you will find within the cut file folder, I cut my card base pieces from some pink card and chose some fun patterned paper for the layering pieces:

HappyBirthdayEdgeCard1

Pic 2. The patterned pieces are adhered directly to the card base pieces:

HappyBirthdayEdgeCard2

Pic 3. Turn the front panel over and add 3d foam pads to the back, I found 2 layers of foam pads worked best:

HappyBirthdayEdgeCard3

Pic 4. Pop your front panel into place, you are now free to decorate as you wish:

HappyBirthdayEdgeCard4

My Completed Card: I lined the inside of my card with more of the patterned paper. Carrying on the Butterfly theme of the paper, I cut a few of these butterflies to embellish my card then popped on a few gems:

HappyBirthdayEdgeCard5

Alternative Card 1: For my second card I cut the card base from some white card, I chose some subtle white and green patterned paper then added a strip of green glitter card:

HappyBirthdayEdgeCard6

Alternative Card 2: For my third card I simply cut the card base from some kraft coloured card and added some natural coloured twine to the front panel before I stuck it down to my card base:

HappyBirthdayEdgeCard7

If you would like to see more projects I have created with my Zing, access my Free Cut Files and read my Terms of Use, you can find my blog here: www.birdscards.com

Here is today’s Cut File:

HappyBirthdayEdgeCardbyBird

Happy Birthday Edge Card Cut File by Bird

Flower Wrap Card

Hi There fellow KnK-ers!

I thought I’d revisit the style of card I created for the Snow Scene Card I posted here but change it up for a spring/summer look, so instead of snowy buildings and trees I’ve opted for some bright sunny flowers. The card base has a cut away section and wraps around the card insert which then both become the front of your card. The cut file is available at the end of the post 🙂

These are the Materials I used:

These are the Zing Settings I used:

  • Blade = Standard
  • Blade Height = 25 post-it notes
  • Offset = 0.30
  • Speed = 10
  • Force =  100 (75 for cutmates)
  • Passes = 1

Pic 1. Here are all of the elements within the cut file, the 2 green layers were cut from Smooth & Silky Cardstock which is nice and sturdy and all of the other elements were cut from Cutmates which is great for more intricate cuts:

Flower Wrap Card 1

Pic 2. Using wet glue to give me some wiggle room time, I glued the 2 green layers together and popped the flower heads into place. While I had the glue out, I also glued the 3 sun layers together:

Flower Wrap Card 2

Pic 3. I flipped the card over and added one strip of double sided tape along the left edge of the back inside the card:

Flower Wrap Card 3

Pic 4. I folded my insert and lined up the fold line with the left edge of the double sided tape:

Flower Wrap Card 4

Pic 5. You can now fold your card base and add your sun to the top of the insert layer with a 3D foam pad:

Flower Wrap Card 5

Pic 6. With a few enamel dots popped into the middle of the flowers for some extra dimension, my card is finished:

Flower Wrap Card 6

If you would like to see more projects I have created with my Zing, access my Free Cut Files and read my Terms of Use, you can find my blog here: www.birdscards.com

Here is today’s Cut File:

Flower Wrap Card by Bird

Flower Wrap Card Cut File by Bird

Spring Birthdays

Hi There fellow KnK-ers!

There are lots of Birthdays in my Family at this time of year so today I have made a Spring Flower card. I turned my card into a Birthday card but with a change of sentiment I think it could be suitable for many other occasions. Cutting the Latticed Daffodil was a breeze as I used CutMates Cardstock, it really is second to none when it comes to more intricate cuts. The Cut File is available at the end of this post 🙂

These are the Materials I used:

These are the Zing Settings I used:

  • Blade = Standard
  • Blade Height = 25 post-it notes
  • Offset = 0.30
  • Speed = 10
  • Force =  100
  • Passes = 1

Pic 1. Below are the 3 layers you will find within the Cut File, I cut my card base and card front layer from Smooth and Silky Card then cut my lattice detail layer from Cutmates Card:

Daffodil Card 1

Pic 2. I first adhered the larger layer directly onto my Card Base with double-sided tape:

Daffodil Card 2

Pic 3. Next, I adhered the detail layer with some wet glue to give me some time to wiggle it into perfect placement:

Daffodil Card 3

Pic 4. I cut a simple banner shape then I picked a font from my computer to cut and use as my sentiment. I popped some 3d foam pads behind the ends of the banner to give my card some dimension and with that my card was finished:

Daffodil Card

If you would like to see more projects I have created with my Zing, access my Free Cut Files and read my Terms of Use, you can find my blog here: www.birdscards.com

Here is today’s Cut File:

Daffodil Card by Bird

Daffodil Card Cut File by Bird

Bookmarks

Hello fellow KnK-ers!

Today I thought I’d do something a little different and make some bookmarks. I was thinking that it would be really cute to make personalised ones for children with their names on. That’s the great thing about having a cutting mchine, no matter how unique our child’s name is, we can make personalised items to make them feel special. You will find the cut files I used for today’s project at the end of this post 🙂

These are the Materials I used:

These are the Zing Settings I used:

  • Blade = Standard
  • Blade Height = 25 post-it notes
  • Offset = 0.30
  • Speed = 10
  • Force =  80 paper/100 card
  • Passes = 1

The bookmark is made up of 4 layers to add some rigidity and for a contrasting edge, I chose a bright spring green. You will find little reinforcing rings in the file to add around the ribbon hole to strengthen them. I glued all of the pieces directly on top of each other to keep the bookmark as flat as possible so it doesn’t add bulk to the book you are reading.

Book-Bookmark

How about adding a pocket to a greetings card to slide a personalised bookmark inside. A card and gift all in one 😉

Reading-Bookmark

If you would like to see more projects I have created with my Zing, access my Free Cut Files and read my Terms of Use, you can find my blog here: www.birdscards.com

Here is today’s Cut File:

BookmarksbyBird

Bookmarks Cut File by Bird