Rotary Tool Wood Engraved and Painted (Spanish)

Rotary Tool Wood Engraved and Painted, Omayra Duarte

We have a new member in our family, it’s a girl! Now, I wanted to bring her a present but I also wanted to bring to my granddaughter (oldest of the two) a present as well. I was wondering what gift would make her feel as special as she is. I didn’t want her to feel excluded, lol. So I decided to make her a Rotary Tool Wood Engraved and Painted illustration with her name on it. Using my KNK Force and the Rotary tool, I was able to make her truly happy. When she read her name on that piece of wood, She was so excited, you could see the joy in her face. I felt that I had gone above and beyond my goals.

This is how the wood looks when the engraving is finished. I LOVE it!!!! I decided to paint the wood but you can just apply a layer of varnish, leaving the wood in it’s natural state.

Rotary Tool Wood Engraved and Painted, Omayra Duarte

This is another project that assures me I have the BEST machines.

Rotary Tool Wood Engraved and Painted Materials:

Settings:

  • Blade Offset = 0
  • Passes (Multi-Cut) = 3
  • SD = 30
  • ED = 95
  • US = 25
  • CS = 15
  • PS = 15
  • LS = 40

Instructions:

  1. First, I choose the design that I wanted to use and then I wrote my Granddaughter’s name.
  2. Then, I marked the center of the wood that I was using, Due that I used the Center Point as a Cut Mode.
  3. After that, I taped the wood to my mat to secure it.
  4. Once the mat was in place, I then established the Origin exactly on the middle of my wood.
  5. When everything was set, I turned on the Rotary tool and then clicked on the cut icon to make the Engraving.

The results were very nice and clean. I LOVE it!

ESPAÑOL – ESPAÑOL – ESPAÑOL – ESPAÑOL – ESPAÑOL


Rotary Tool Wood Engraved and Painted, Omayra Duarte

Tenemos un nuevo miembro en nuestra familia. Así que quise traerle un regalo pero me estuve preguntando que regalo llevarle a mi nieta para hacerla sentir especial también. Por lo que decidí hacerle una Madera Grabada y pintada con su nombre utilizanto la Herramienta Rotatoria. Así que utilizando mi KNK Force y la Herramienta Rotatoria pude hacerla muy feliz. Cuando ella leyó su nombre en la pieza de madera, ella se puso tan contenta que me hizo sentir que había alcanzado mi meta, Hacerla sentir Especial!

Así es como se ve la madera una vez grabada. Me ENCANTA!!! Yo decidí pintar la madera pero ustedes solo pueden aplicar una capa de Varnish y dejar la madera natural.

Rotary Tool Wood Engraved and Painted, Omayra Duarte

Este es otro proyecto que me asegura tener Las MEJORES máquinas.

Materiales:

Ajuestes:

  • Blade Offset = 0
  • Passes (Multi Cut) = 3
  • SD = 30
  • ED = 95
  • US = 25
  • CS = 15
  • PS = 15
  • LS = 40

Instrucciones:

  1. Primero, decidí el diseño a utilizar y luego escribí el nombre de mi nieta.
  2. Luego, marqué el centro de la pieza de madera que estaba utilizando, ya que estaba utilizando “Center Point” como Modo de Corte (Cut Mode).
  3. Luego de eso, Con cinta adhesiva aseguré la madera al tapete de corte.
  4. Una vez el tapete estaba en su lugar, establecí el Origen exactamente en el medio de mi madera.
  5. Cuando todo estaba listo, prendí la Herramienta Rotatoria y luego hice clic en cortar para hacer el grabado.

El resultado fue limpio y nítido, Me Encanta!

4 thoughts on “Rotary Tool Wood Engraved and Painted (Spanish)

    • Thank you, Rhonda. I am not going to tell you that at the beginning I was afraid to do it. Once you try it, you can notice that it is not as bad as you think it is, lol. It is something really easy, fun and nice to do it.

Comments are closed.