Orbit Meets Fabric

I am fortunate to have gotten to play with a new ZING ORBIT!!!  It is a great cutter and the improvements and new features make it a delight to use.  Of course, without the super manual by Sandy McCauley, I would have been lost.  Because of the nature of my job at Sew-Ciety, I have been test cutting fabrics to be used as appliques in quilting projects. The Orbit has performed flawlessly.  Any difficulties I’ve encountered have been due to the old bugaboo “Operator Error”.

Here is a sample of the testing that I have done most recently

Okay, you can ignore the large red rectangle on the upper left.  That was an additional piece of fabric that had been placed there in case my settings for a similar piece on the upper right weren’t working.

Materials Used:

Cotton Batik Fabric

Cotton Quilting Fabric

Cotton Flannel

Lite Steam-A-Seam 2

Settings:

Machine used:  KNK Zing Orbit , Blade:  Fabric Blade, Speed: 10, Blade Offset: 0.75, Height:  20 PIN

Cotton Batik Fabric:  Force:  60, Passes: 1

Cotton Quilting Fabric (Green): Force:  75,  Passes:  1

Cotton Quilting Fabric (Pink):  Force:  65,  Passes:  2

Cotton Flannel (Both colors):  Force:  70, Passes:  2

Additional Information:

This is what the fabrics looked like before I did any cutting so you can relate the settings to the fabrics.

All of the fabrics had Lite Steam-A-Seam fused to the wrong side prior to being placed on the mat.  The mat is new and the blade is new also.  I was pleased to see that the adhesive on the mat did not ‘bond’ with the Steam-A-Seam and pull the Steam-A-Seam off of the fabric after cutting.  It is necessary to be sure that the Steam-A-Seam is securely fused to the fabric before placing the fabric on the mat.

I wanted to see if it made any difference when cutting the cotton quilting fabrics (green & pink) whether I used more or less force and one or two passes.  In this instance it worked equally well.  The Cotton Batik cuts very easily and is thinner than the Cotton Quilting fabric so the blade length setting is important when cutting different types of fabric.  The Cotton Flannels are thicker and need a blade length adjustment also.

The sizes of the hearts are (smallest to largest) 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, and 1 1/4 inches, and 1 1/2″ inches.  The stars are 1 inch.  I am intrigued that the 1/4″ hearts cut so perfectly.  That’s why I had to cut more of them up by the stars.

The other part of my testing was that I was cutting from Sure Cuts A Lot which, again, I would have been floundering without the excellent information and instruction from the User Manual by Sandy.  Thanks, Sandy, for all your help!!

 

 

6 thoughts on “Orbit Meets Fabric

  1. Wow! 1/4″ cuts on fabric. I’m always willing to test any material on any of our cutters, but I can’t say I would have thought to try 1/4″ anything on fabric! Great post, Judy. Thanks for sharing 😀

  2. So glad you got to test the ZO on fabric and thanks for the settings! They will be added to our table.

  3. These are wonderful examples of fabrics cut on the new Zing Orbit. Also, your explanation and how-to’s are superb. It’s not often we need a 1/4″ cut, but it’s good to know it is doable. Great post!

  4. I’ve wanted to cut fabric on my KNK Maxx for a long time. Well I’m going to give it a try. I’ve got the fabric blades so any hints for me is appreciated. I’ll have to change the svg to knk. I hope it will work. I’m making some embroidery blocks that I’ve cut out by hand and they don’t fit well after the placement embroidery stitches. Thanks, Pam

  5. Great post, Judy. Always glad to hear a new machine is working well without a lot of bugs. The cuts did indeed turn out very well. Loved seeing the results.

Comments are closed.