Law enforcement officers across our country had a rough year in 2016. There are good cops and bad cops, just like in any profession. But the most loved cop is always the K9 officer. In our neighboring community, Utos their K9 officer, died after a very brief illness, a virus which attacked his heart. I made this for his partner. Materials
extra fine glitter
15″ KNK Maxx
red capped blade
I used a clear 3″ flat ornament purchased on line. They can also be found at most craft stores. I removed the top and set it aside. Then I poured some poly acylic into the ornament and swished it around to ensure the entire inside had been coated. Then I set it upside down in a Dixie cup to drain for a minute or two. Next is adding the glitter, once again rolling the ornament to ensure the entire inside is coated. Then I tip the ornament upside down and let it rest in a dixie cup. I generally do a bunch at a time and the poly acrylic that drains is used for the next ornament, same with the excess glitter. I then place them in an egg carton, still upside down and let them dry for a few days. Next I traced the image of shield that I found online. To make a perfect fitting blue line I used snap to grid and then used the ginsu knife feature and cut that section out of the shield. And then it was just adding the words. When cutting letters this small I try to use a basic font so that it cuts and weeds well. I applied everything to the shield prior to transferring it to the ornament. When applying vinyl to any surface that has a curve (although this is a “flat” ornament, it still has a curve) I always start at the center of the design and work out. You can make a large variety of personalized ornaments by adding vinyl.